Genesis GV60 2023 - High Beam Assist Malfunction and Limitations

5-99
05
High Beam Assist Malfunction
and Limitations
High Beam Assist malfunction
OJWEV051094L
When High Beam Assist is not working
properly, the ‘Check High Beam Assist
(HBA) system’ or ‘Check HBA (High
Beam Assist system’ warning message
will appear and
warning light will
illuminate on the cluster. Have the
vehicle be inspected by an authorized
retailer of Genesis Branded products.
Limitations of High Beam Assist
ś Light from an oncoming or front
vehicle is not detected because of
lamp damage, or because it is hidden
from sight, etc.
ś Headlamp of an oncoming or front
vehicle is covered with dust, snow or
water.
ś There is a lamp that has a similar
shape as a vehicle’s lamp.
ś Headlamps have been damaged or
not repaired properly.
ś Headlamps are not aimed properly.
ś Driving on a narrow-curved road,
curved road, rough road, uphill or
downhill.
ś Vehicle in front is partially visible on a
crossroad or curved road.
ś There is a traffic light, reflecting sign,
flashing sign or mirror ahead.
ś There is a temporary reflector or flash
ahead (construction area).
ś The road conditions are bad such as
being wet, iced or covered with snow.
ś A vehicle suddenly appears from a
curve.
ś The vehicle is tilted from a flat tire or
is being towed.
ś Light from an oncoming or front
vehicle is not detected due to
obstacles in the air such as exhaust
fume, smoke, fog, snow, or water spay
or blizzard on the road, or fogging in
the lamp, etc.
Information
For more details on the limitations of the
)URQW9LHZ&DPHUDUHIHUWR³)RUZDUG
Collision-Avoidance Assist (FCA)” section
in chapter 7.
WARNING
ś At times, High Beam Assist may not
work properly High Beam Assist is
for your convenience only. It is the
responsibility of the driver for safe
driving practices and always check
the road conditions for your safety.
ś When High Beam Assist does
not operate properly, change
the headlamp position manually
between high beam and low beam.