Genesis GV60 2023 - Page 204

5-13
05
Smart phone registration
1. Turn the vehicle on with the Smart key
and make sure to keep the smart key
inside the vehicle during digital key
registration.
2. Open Genesis Digital Key App in the
vehicle owner’s smart phone and
activate the digital key registration
screen after selecting the vehicle to
register.
OJWEV051287N
3. From the infotainment system settings
PHQXVHOHFWœ6HWXSƟ9HKLFOHƟ
'LJLWDO.H\Ɵ6PDUWSKRQH.H\Ɵ0\
Smartphone Key’.
OJWEV051008
[A] : In-vehicle authentication pad
(Wireless charging pad)
4. After ‘My Smartphone Key’ is selected,
place the backside of the smart phone
on the in-vehicle authentication pad.
5. 6HOHFWœ6PDUWSKRQH.H\Ɵ0\
6PDUWSKRQH.H\Ɵ6DYHŔPHQXRQ
the infotainment system screen.
The saving process will begin
automatically.
6. When the digital key (smart phone) is
saved, a message will appear on the
infotainment system screen.
7. Remove the smart phone from the
pad and complete the saving process
under the guidance of the smart
phone screen.
Information
ś 9HKLFOH
:KHQWKHUHLVDGLJLWDONH\VPDUWSKRQH
already saved in the vehicle, the ‘Save’
menu is disabled. If you want to save a
digital key again, refer to “How to delete
Digital Key (Smart phone)” and follow
the deleting procedure first before saving
a digital key.
ś Smart phone
The digital key cannot be saved again
while the vehicle’s digital key is saved in
the owner’s smart phone. Save the digital
key after deleting the digital key from the
Digital Key App.
ś During the digital key saving process,
the process will cancel when:
- The smart phone is removed from
the in-vehicle authentication pad
(wireless charging pad)
- Changing the infotainment system or
instrument cluster screen
- The vehicle is turned off
- The gear is shifted
- Saving digital key that does not
belong to the vehicle owner
- The smart phone screen is locked or
turned off
- NFC setting of your smart phone is
off (saving process will not begin)
- There is no smart key (saving process
will not begin)