7-13
07
Lane-Change Oncoming function (if
equipped)
Warning and control
Lane-Change Oncoming function will
warn and control the vehicle depending
on collision risk level: ‘Collision Warning’
and ‘Emergency Steering’
OJWEV071009L
Collision Warning
ś To warn the driver of a collision, the
‘Collision Warning’ warning message
will appear on the cluster, an audible
warning will sound and the steering
wheel will vibrate.
ś The function will operate when
your vehicle speed is between
approximately 25-90 mph (40-145
km/h) and the detected oncoming
vehicle speed is approximately
above 6 mph (10 km/h) and the
relative speed with your vehicle is
approximately below 124 mph (200
km/h).
OJWEV071011L
(PHUJHQF\6WHHULQJ
ś To warn the driver that emergency
steering will be assisted, the
‘Emergency Steering’ warning
message will appear on the cluster,
an audible warning will sound and the
steering wheel will vibrate.
ś The function will operate when
your vehicle speed is between
approximately 25-90 mph (40-145
km/h) and the detected oncoming
vehicle speed is approximately
above 6 mph (10 km/h) and the
relative speed with your vehicle is
approximately below 124 mph (200
km/h).
ś In emergency steering situation,
steering is assisted by the function
to help prevent collision with the
oncoming vehicle.
To Next Page
Loading...
