Genesis GV80 - Seat Easy Access

Convenient features
5-22
NOTICE
• Whilst integrated memory system
is being reset, if the resetting
and notification sound stops
incompletely, restart the resetting
procedure again.
• 0DNHVXUHWKDWWKHUHLVQRREMHFWV
around the driver’s seat in advance
of resetting the integrated memory
system.
Seat easy access
Seat easy access will move the driver’s
seat and steering wheel automatically as
follows:
• Exiting the vehicle:
The driver’s seat, steering wheel and
seat bolster will move as follows when
the Engine Start/Stop button is in the
OFF position with the gear in P (Park)
and the driver’s door open.
- Driver seat: Moves rearward
depending on the distance selected
from the Settings menu in the
infotainment system.
- Steering wheel: Moves upward
- Seat bolster (if equipped): Adjusted
to the default position.
However, the driver’s seat may not
move rearward if there is not enough
space between the driver’s seat and
the rear seats.
Also, on a regular basis, the steering
wheel will also move forward to adjust
its location by itself.
• Entering the vehicle:
The driver’s seat, steering wheel and
seat bolster will move as follows
when the Engine Start/Stop button
is pressed to the ACC, ON or START
position or whilst carrying the smart
key, the driver’s door is closed with
the Engine Start/Stop button in the
OFF position.
- Driver seat: Moves back to its
original position.
- Steering wheel: Moves back to its
original position.
- Seat bolster (if equipped): Adjusted
to the default position.
• You can set the Seat Easy Access
function from the Settings menu
in the infotainment system screen.
Select:
- Driver seat
6HWXSƟ9HKLFOH6HWWLQJVƟ6HDWƟ
6HDWLQJ(DV\$FFHVVƟ'ULYHU6HDW
(DV\$FFHVVƟ1RUPDO([WHQGHG2II
- Steering wheel
6HWXSƟ9HKLFOH6HWWLQJVƟ6HDW
Ɵ6HDWLQJ(DV\$FFHVVƟ6WHHULQJ
wheel easy access
For detailed information, scan the QR
code in the separately supplied simple
manual.