Genesis GV80 - Dashboard Fuse Replacement

09
9-43
Dashboard fuse replacement
Driver’s sideDriver’s side
OJX1090019ROJX1090019R
Luggage compartmentLuggage compartment
OJX1099018OJX1099018
1. Turn the vehicle off.
2. Turn all other switches off.
3. Open the fuse panel cover.
4. Refer to the label on the inside of
the fuse panel cover to locate the
suspected fuse location.
OJX1099020OJX1099020
5. Pull the suspected fuse straight out.
Use the removal tool (1) provided in
the engine room fuses panel cover.
6. Check the removed fuse; replace it if
it is blown. Spare fuses are provided
in the dashboard fuse panels (or in the
engine room fuse panel).
7. Push in a new fuse of the same rating,
and make sure it fits tightly in the
clips. If it fits loosely, we recommend
that you consult an authorised
Retailer of Genesis Branded Products.
In an emergency, if you do not have
a spare fuse, use a fuse of the same
rating from a circuit you may not need
for operating the vehicle, such as the
cigarette lighter fuse.
If the headlamps or other electrical
components do not work and the fuses
are undamaged, check the fuse panel
in the engine room. If a fuse is blown, it
must be replaced with the same rating.