Genesis GV80 User Manual

06
6-7
Engine Stop/Start button positions
Button
Position
Action Notes
OFF
To turn off the engine, press the
Engine Start/Stop button with the
vehicle shifted to P (Park).
Note if the Engine Start/Stop button
is pressed with the vehicle shifted to
D (Drive) or R (Reverse), the gear will
automatically shift to P (Park).
If the Engine Start/Stop button
is pressed with the gear shifted
to N (Neutral), the Engine Start/
Stop button will change to the ACC
position.
The steering wheel locks to protect
the vehicle from theft.
If the steering wheel is not locked
properly when you open the driver’s
door, the warning chime will sound.
ACC
Press the Engine Start/Stop button
when the button is in the OFF position
without depressing the brake pedal.
Some of the electrical accessories are
usable.
The steering wheel unlocks.
• If you leave the Engine Start/Stop
button in the ACC position for more
than one hour, the battery power will
turn off automatically to prevent the
battery from discharging.
• If the steering wheel doesn’t unlock
properly, the Engine Start/Stop
button will not work. Press the
Engine Start/Stop button whilst
turning the steering wheel right and
left to release.
ON
Press the Engine Start/Stop button
whilst is in the ACC position without
depressing the brake pedal.
The warning lights can be checked
before the engine is started.
Do not leave the Engine Start/Stop
button in the ON position when the
engine is not running to prevent the
battery from discharging.
START
To start the engine, depress the brake
pedal and press the Engine Start/ Stop
button with the gear shifted to the P
(Park) or the N (Neutral) position.
For your safety, start the engine
with the gear shifted to the P (Park)
position.
If you press the Engine Start/Stop
button without depressing the brake
pedal, the engine does not start and
the Engine Start/Stop button changes
as follows:
2))Ɵ$&&Ɵ21Ɵ2))RU$&&
ÃTo prevent vehicle battery discharge, the engine turns off when the Engine Start/
Stop button is in the ACC or ON position with the gear in P (Park) for a certain period
of time. When the function operates, the tail lamps will turn off. To use the tail lamps
again, turn the headlamp switch located on the steering column to the OFF and ON
position again.

Genesis GV80 Specifications

General

Brand	Genesis
Model	GV80
Category	Automobile
Language	English