05
5-33
Automatic reverse
OJX1059032OJX1059032
If a window senses any obstacle whilst it
is closing automatically, it will stop and
lower approximately 12 in. to allow the
object to be cleared.
If the window detects the resistance
whilst the power window switch is
pulled up continuously, the window
will stop upward movement then lower
approximately 1 in.
If the power window switch is pulled
up continuously again within 5 seconds
after the window is lowered by the
automatic window reverse feature,
the automatic window reverse will not
operate.
Information
The automatic reverse feature is only
active when the “Auto Up” feature is used
by fully pulling up the switch to the second
detent.
WARNING
0DNHVXUHERG\SDUWVRURWKHUREMHFWV
are safely out of the way before closing
the windows to avoid injuries or vehicle
damage.
Objects less than 0.16 inch in diameter
caught between the window glass and
the upper window channel may not
be detected by the automatic reverse
window and the window will not stop
and reverse direction.
To Next Page
Loading...
