Driving your vehicle
6-30
Information
• The Auto Hold does not operate when:
- The driver's door is opened
- The engine bonnet is opened
- The gear is in P (Park) or R (Reverse)
- EPB is applied
• For your safety, the Auto Hold
automatically switches to EPB when:
- The driver's door is opened
- The engine bonnet is opened
- The vehicle is in a standstill for more
than 10 minutes
- The vehicle is standing on a steep
slope
- The vehicle moved several times
In these cases, the Parking Brake
warning light comes on, the AUTO
HOLD indicator changes from green
to white, and a warning sound and a
message will appear to inform you that
EPB has been automatically engaged.
Before driving off again, depress the
brake pedal, check the surrounding
area near your vehicle and release the
parking brake manually with the EPB
switch.
• Whilst operating Auto Hold, you may
hear mechanical noise. However, it is
normal operating noise.
NOTICE
If the AUTO HOLD indicator changes
to yellow, Auto Hold is not working
properly. We recommend that you
contact an authorised Retailer of
Genesis Branded Products.
WARNING
• Depress the accelerator pedal slowly
when you start the vehicle.
• For your safety, cancel Auto Hold
when you drive downhill, back up the
vehicle or park the vehicle.
NOTICE
If there is a malfunction with the
driver's door or engine bonnet open
detection system, Auto Hold may not
work properly.
We recommend that you contact an
authorised Retailer of Genesis Branded
Products.
Warning messages
OJX1069066LOJX1069066L
Parking brake automatically applied
When EPB is applied whilst Auto Hold
is activated, a warning will sound and a
message will appear.
To Next Page
Loading...
Need help?
General
