07
7-127
OJX1079246LOJX1079246L
Warning Volume
With the Engine Start/Stop button in the
21SRVLWLRQVHOHFWœ'ULYHU$VVLVWDQFHƟ
Warning Volume’ from the Settings menu
to change the Warning Volume to ‘High’,
‘Medium’, ‘Low’ or ‘Off’ for Rear Cross-
Traffic Safety system.
However, when Warning Volume is
turned off, the steering wheel vibration
function will turn on if it was turned off.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
&$87,21
• The setting of the Warning Timing
DQG:DUQLQJ9ROXPHDSSOLHVWR
all functions of the Rear Collision-
$YRLGDQFH$VVLVW
• (YHQWKRXJKœ1RUPDOŔLVVHOHFWHGIRU
:DUQLQJ7LPLQJLIWKHYHKLFOHVIURP
the left and right side approaches
DWKLJKVSHHGWKHLQLWLDOZDUQLQJ
DFWLYDWLRQWLPHPD\VHHPODWH
• 6HOHFWœ/DWHŔIRU:DUQLQJ7LPLQJ
ZKHQWUDIILFLVOLJKWDQGZKHQGULYLQJ
VSHHGLVVORZ
Information
If the engine is restarted, Warning Timing
and Warning Volume will maintain the
last setting.
6\VWHPRSHUDWLRQ
System warning and control
Rear Cross-Traffic Safety system will
warn and control the vehicle depending
on collision level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’.
ORG3070025RORG3070025R OJX1079164OJX1079164
OJX1079166LOJX1079166L
Collision Warning
• To warn the driver of an approaching
vehicle from the rear left/right side of
your vehicle, the warning light on the
outside rearview mirror will blink and
a warning will appear on the cluster.
At the same time, an audible warning
will sound and the steering wheel will
vibrate. If the Rear View Monitor is
operating, a warning will also appear
on the infotainment system screen.