Genesis GV80 - Page 50

03
3-21
3. After getting in or out, push the
second row seat to the rearward
position and pull the seatback firmly
rearward until it clicks into place.
Make sure that the seat is locked in
place.
Ã7-seater with a second row power
adjustment seat: If the seat is
pushed rearward till it is stopped, the
seatback will automatically unfold.
Information
The walk-in switch operates only when the
gear is in P (Park) and the door is open.
Folding the rear seats
The rear seatbacks can be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.
Before folding the rear seats, lower the
head restraint to the lowest positon and
store the seat belt buckles in the holders
and webbing in the guide.
If you want to use the rear seats, make
sure the seatbacks are upright and
securely locked in place. Always return
the head restraint and seatbelt to its
proper position.
For more details on how to fold and
unfold the rear seats, refer to the
preceding pages in the “Rear Seats”
section in this chapter.
OJX1039114LOJX1039114L
Second and third row seatback folding (if
equipped)
Second and third row seatback folding
can be done from the Settings menu in
the infotainment system screen. Select:
- 6HDWƟQGUG5RZ6HDW%DFN)ROG
Unfold