• 2 programmable high current outputs (0.6 A, com-
mon switching),
• 4 programmable low-current OC outputs (150 mA,
common switching),
• 2 AUX terminals for auxiliary power supply (12 V,
0.6 A total),
• 8 user codes + installer code,
• shared bus for keypads and expansion modules with
automatic address configuration,
• built-in switching 2A mode power supply, with bat-
tery charging circuit and deep discharge protection,
• 8 schedulers with weekly programming,
• EN 50131 Grade 2 compliance,
• system programming via keypad or computer (RS-
TTL local programming).
To Next Page
Loading...