➔ The panel will display the list of system status
that do need an intervention or acknowledg-
ment.
➔ If there are no status that do require an inter-
vention, the panel will display „System OK”.
➔ Pressing the Accept key will suppress any
inactive faults and other information that re-
quire an intervention.
➔ Further information may be accessed by us-
ing i keys, to quit to previous menu
level the key should be pressed.
8.2 GSM OPERATOR SELECTION
PRiMA panels do allow to use a SIM card from any
GSM operator, there is no „SIM Lock” function used.
For selected operators, the panel may automatically
configure Pre-paid support codes and/or GPRS set-
tings.
For other operators, these settings (Pre-paid USSD
codes, GPRS settings) shall be set manually according
to the information provided by the GSM operator.
8.3 STARTING SERVICE MODE WITHOUT
KNOWING THE INSTALLER CODE
If installer code is not known, in order to enter service
mode the following steps shall be followed:
To Next Page
Loading...