8.5 PROGRAMMING USING A COMPUTER
Programming the PRiMA panels requires installation of
PRiMAtool application, which can be downloaded free
of charge from the www.genevo.pl website.
PRiMAtool requirements:
• Windows XP, VISTA, 7, 8, 10 (32bit and 64bit)
operating systems,
• .NET Framework 3.5 or newer,
• 800x600 display resolution or higher,
• public IP address and configured TCP port for-
warding on router (only for GPRS program-
ming).
For connection between panel and computer, an RS-
TTL cable with PIN3 connector shall be used. This may
be GENEVO CUSB-PIN3 cable, or compatible PIN3 SA-
TEL programming cable.
NOTICE
➔ If an error message „The application failed to ini-
tialize properly. Click on OK to terminate the appli-
cation” appears when running PRiMAtool in Win-
dows XP, it means that the .NET framework (ver-
sion 3.5 minimum) shall be installed. It may be
freely downloaded from Microsoft website.
To Next Page
Loading...