GENEVO PRiMA 6 - 3 Service Functions List; 1 General Settings; 8 SMS Remote Control

8.6.3 Service functions list
8.6.3.1 General settings
101. Set installer code
Allows to enter new installer code
Default setting 12345
107. Default codes and settings
Restores all settings and user codes to factory de-
fault configuration. In order to prevent unwanted
use, proceeding with reset requires confirmation.
110. Default user codes
Restores all user codes incl. installer code to factory
default configuration. In order to prevent unwanted
use, proceeding with reset requires confirmation.
125. Select language
Allows to select user interface language. Selecting
language alters keypad menu items as well as SMS
texts sent by the panel.
131. Communication features
Enable and disable selected communication fea-
tures:
1 CMS reporting
2 SMS messaging
3 Audio messaging
4 SMS remote control
5 GPRS programming
Factory configuration: 1, 2, 3, 4, 5
132. General system options