1 SAFETY RELATED INFORMATION
• PRiMA16 alarm control panel is an electric device,
that requires AC 230V 50Hz supply for its operation.
• Lack of care during installation may impose serious
hazard for health or life!
• An alarm panel should only be installed by a quali-
fied technician.
• All operations that require an access to primary
(mains) circuits shall only be performed with the cir-
cuit shut down, e.g. by using a circuit breaker.
• It is forbidden to use fuses with different rating than
specified in the technical documentation and/or
nameplate.
• A great care should be paid to proper selection of
the mains transformer, and to use a properly rated
security circuit (if a transformer with multiple sec-
ondary circuits is used).
• After the installation is completed, the enclosure
which contains mains connection shall be secured
to avoid access by unauthorized person.
• All packaging materials (plastic bags, bubble wrap),
after unpacking, shall be kept away from the reach
of children.
To Next Page
Loading...