811...814. SMS command output A...D On
SMS command to turn on output “Controlled
A...D”.
Default: „output A...D on”
815...818. SMS command output A...D Off
SMS command to turn off output “Controlled
A...D”.
Default: „output A...D off”
819. SMS command outputs status request
SMS command to check state of outputs “Con-
trolled A...D”.
Default: „outsstatus”
Telephone numbers for SMS control
831. Telephone numbers for SMS control
Selection of Telephone numbers 1...8 (defined
in functions 601...608), authorized for SMS re-
mote control.
839. SMS remote control options
- Use confirmation code
enabled – each remote SMS command will
cause the panel to send back a unique three-
digit confirmation code which shall be sent back
to the panel in order to confirm a command.
This protects the system against attempts of
using SMS-spoofing techniques to compromise
the security system.
disabled – each SMS command from an autho-
rized number is executed immediately (default).
To Next Page
Loading...