Genius REMOTE 600 - Page 18

ENGLISH
6. Aim the IR
transmitter of your
device’s remote
control at the
learning eye of
the Remote 600.
7. Continually press the corresponding button on
your existing remote control until the Remote
600 LED lights.
If the function is not learned correctly, the LED
flashes three times and the Remote 600 emits
a triple beep. Do the relearning procedure
again.
8. When the code has been learned, the
Remote 600 emits a beep and the LED on the
Remote 600 lights until you release the button
on the device’s remote.
9. Repeat steps 5 – 8 for all the buttons you want
to program.
10. When you have finished, press
.
1
6