Zenith35 Pro GNSS Series - 10 -
Installation Guide © 2016 GeoMax AG, Widnau Switzerland
3.8 INSTALLATION OF LICENCES
If optional receiver licenses such as Galileo are additionally ordered, they will not be activated
before delivery. Therefore, when the equipment is first received, the optional licences still
need to be loaded onto the receiver. These options are activated by means of a NovAtel
Authorization code, which is embedded in a licence key file. The license key file is obtained
via email upon delivery of the Zenith35 Pro. An example of the NovAtel Authorization code is:
“ZBBPB7,WJ73FJ,DMDC36,82BPJ4,8C8WN5,CFNRNNTVN” where the first 3 digits of the last
part specifies the included functionality, as follows:
DFNRNNTVN GPS, GLONASS, all Frequencies, 20 Hz
CFNRNNTVN GPS, GLONASS, BeiDou, all Frequencies, 20 Hz
TFNRNNTVN GPS, GLONASS, Galileo, all Frequencies, 20 Hz
FFNRNNTVN GPS, GLONASS, BeiDou, Galileo, all Frequencies, 20 Hz
The licence key file can be installed onto the receiver by using GeoMax Z35WebManager. With
the receiver connected to the GeoMax Z35WebManager, select option Updates → License-
Key File. Choose the key file (for example L_xxx.key where xxx is the receiver serial
number) and click Upload. A confirmation message will be shown once the option has been
activated.
Note:
A manual entry of the license key is NOT supported. The files must be uploaded!
3.9 DISCONNECTING FROM THE PC
Once the receiver configuration is complete, it can be disconnected from the PC. Simply close
your GeoMax Z35WebManager and disconnect the WiFi-connection.
To Next Page
Loading...
Need help?
General
