Zenith35 Pro GNSS Series - 6 -
Installation Guide © 2016 GeoMax AG, Widnau Switzerland
3.3 CONNECTION TO YOUR PC
Once the serial number of the sensor is visible in the Wireless Network Connection list,
click “Connect”. The Zenith35 Pro and your PC will be connected.
3.4 START THE GEOMAX Z35WEBMANAGER
As soon as you are connected to the receiver, start the web browser (e.g. Internet
Explorer, Firefox, Chrome…) and insert the following IP address in your browser:
http://192.168.10.1
A login-window pops up.
To Next Page
Loading...
Need help?
General
