Zenith35 Pro GNSS Series - 14 -
Installation Guide © 2016 GeoMax AG, Widnau Switzerland
The activation key can be generated by using MicroSurvey’s webportal, at the link
http://microsurveylicenseserver.com/ValidateSerialNumber.aspx. This webportal is shown
in the screenshot below. At the blank serial number field, enter your GUID and click
Submit. At the next screen, enter the Device ID shown on the handheld. The activation
key will then be displayed in the password field. Enter this key into the handheld at the
provided fields and click Apply Key.
Note: Please make certain that the Device ID is entered correctly first time, since an
activation key cannot be generated again with a different ID.
To Next Page
Loading...
Need help?
General
