Zeta125/ Zeta125s | 34Product Overview
EN
Setup prepara-
tion
Use in large diameter or water bearing pipes
Unscrew the standard 150 mm feet extensions and screw on the optional avail-
able base feet extensions.
Use in pipes with 125 mm diameter
4. Set positive/negative grade. Select and set individual
digits for grade values:
Use the right/left arrow key to select the digit that must
be changed.
Use the up/down arrow key to change the value.
5. Press the Enter key to confirm the setting. The laser
adjusts to the setting entered.
Step Description
Place the laser without metal feet and with
the optional clip-in target plate.
008397_001
GeoMax_Zeta125_Zeta125s_UM_v1.0.0_en.fm Page 34 Friday, November 28, 2014 9:23 AM
To Next Page
Loading...
Need help?
General
