Zeta125/ Zeta125s | 38Product Overview
EN
Laser beam
flashing
frequency
Type Description To do
Permanently on
Levelling finished
Grade value reached
Adjust the pipe
Flashing constantly
Laser is levelling
Laser symbol is
flashing
Wait until level is reached
2 x short
Cross Axis Warning
Angle error too large
Adjust laser position to the level
vial
Levelling range
exceeded
(+/-END)
Change inclination of the laser
until END disappears
Flashing fast
Aligning function After ending this mode the laser
switches to normal function
GeoMax_Zeta125_Zeta125s_UM_v1.0.0_en.fm Page 38 Friday, November 28, 2014 9:23 AM
To Next Page
Loading...
Need help?
General
