Zeta125/ Zeta125s | 40Product Overview
EN
Warning
messages
Possible warning messages, their reasons and necessary actions are:
Warning message Description To do
Self-levelling
range exceeded
Change the tilt of the laser as shown
in the display until warning message
disappears. Self levelling starts again
automatically.
Laser beam flashing
2x short AND
Cross axis
range exceeded
Example:
Rotating the
pipe while
working.
Move the instrument so that the level
vial in the instrument display is in
middle position.
Refer to "SETTINGS menu" for infor-
mation on turning on/off the warning.
Service Service Display
1500 h oper-
ating hours are
reached.
Contact your service centre for
checking the laser.
The instrument can be used unre-
stricted in the meantime.
007168_001
007169_001
GeoMax_Zeta125_Zeta125s_UM_v1.0.0_en.fm Page 40 Friday, November 28, 2014 9:23 AM
To Next Page
Loading...
Need help?
General
