Negative grade screens
If you want to prevent confusion when setting up the laser, you
can disable the negative grade function on the Zone80 DG.
•
ON: Negative grade is enabled.
•
OFF: Negative grade is disabled.
When negative grade is disabled, only positive grade can be
entered in the direction of the arrow-shaped alignment
marks on the top of the Zone80 DG.
Radio screens
To be able to communicate with the ZRC60 remote control and
the receiver, the radio on the Zone80 DG must be enabled. The
radio is automatically enabled when the units are paired
together.
•
ON: Radio is enabled.
•
OFF: Radio is disabled.
☞
If you do not use the remote control or the receiver,
it is recommend to disable radio in order to save
battery life.
Negative grade - enable/
disable
Radio - enable/disable
Zone80 DG Menu 37
To Next Page
Loading...
Need help?
General