GeoMax Zone80 DG User Manual

007645_001
Enable calibration alert
screen
007646_001
Disable calibration alert screen
Setting the hours for calibration alert
If you enabled the calibration alert function, the “Set Calibration Alert Hours” screen is dis-
played. The default setting is 1.040 hours, which corresponds to approximately 6 months,
based on a 40-hour working week.
007647_001
Set calibration alert
hours screen
Set the number of hours you would like to work before receiving
a calibration alert.
The hours can be set in increments of 40 hours.
Display of calibration alert on start-up screen
If you enabled the calibration alert function, the calibration alert hours are displayed on the
start-up screen after turning on the Zone80 DG:
18300_001
Calibration alert hours on
start-up screen
•
LAST CAL: The number of hours since the last calibration.
•
NEXT CAL: The number of hours remaining until the next
calibration is planned.
Zone80 DG Menu 41

GeoMax Zone80 DG Specifications

General

Brand	GeoMax
Model	Zone80 DG
Category	Laser Level
Language	English