14
3. Click the Search for network host button to detect the NAS installed under the LAN.
The detected network hosts are listed.
4. Select a NAS from the list and click the Search the host’s network storage button to
detect its shared folder(s).This dialog box appears.
5. Type the administrator username and password of the NAS device that allows for highest
level of access. The default username and password for a GV-NAS System are both
admin. The server’s folders are detected and shown.
6. Expand the sever to show its folders
7. Assign storage paths for GV-IP Cameras.
To Next Page
Loading...
Need help?
General
