Configuring the NAS
15
3
A. Select at least one camera.
B. Select a NAS folder and click the Select this storage path for the device
button
to assign this storage path. The storage path appears in the Storage Path column
immediately.
C. Type the ID and password of an established account of the NAS server. For example,
for a GV-NAS System, type the default username Cam01 and default password
12345678.
D. In the Storage Path column, you can manually change the IP address of a GV-NAS
System.
8. Click the Save
button to store the settings.
Note:
1. Be sure that you assign each camera to record to a different user account in GV-NAS
System to avoid disrupting the recycling process. For details, see GV-NAS System User’s
Manual.
2. For GV-NAS2008 / 4008, the default user name is Cam01 up to Cam08 for each of the 8
user accounts; for GV-NAS2016 / 4016, the default user name is Cam01 up to Cam16 for
each of the 16 user accounts. The default passwords are all 12345678. For details, see
GV-NAS System Quick Start Guide and User’s Manual.
To Next Page
Loading...
Need help?
General
