Gerber Technology AccuPlot AP-100 User Manual

Offline Operation
Plotter Parameters 4-17
Default Miscellaneous Parameters
Table 4-4 shows the plotter miscellaneous parameters, their function, and the
GGT default setting for each. The parameters appear on the control panel
screen in the order they are listed in the table. Follow the instructions starting
on page 4-12 to adjust the values for these parameters.
TABLE 4-4 PLOTTER MISCELLANEOUS PARAMETERS
parameter function default
Language Sets menu language from standard
to alternate.
0 = standard
1 = alternate
0 – STD
Font Type Sets style of font used in plotting.
0 = fast
1 = elaborate
0 – FST
Character Set Sets character used for plotting to
the downloaded set.
0 = standard
1 = alternate
0 – STD
Annotate With
Inkjet
Prints all annotation with the inkjet
head, overriding any tool selection
command sent from your marker
making system.
0 = no
1 = yes
0 – NO
Pen Up Velocity Sets velocity limit for pen up
movement.
66 in/sec
Pen Up
Acceleration
Sets acceleration limit for pen up
movement.
AJ-520 = 2.0 Gs
AP-100, 300, 320, 360 = 2.5
Gs

Gerber Technology AccuPlot AP-100 Specifications

General

Brand	Gerber Technology
Model	AccuPlot AP-100
Category	Plotter
Language	English