Gerber Technology AccuPlot AP-100 User Manual

Offline Operation
4-16 Plotter Parameters
Default Paper Advance Parameters
Table 4-3 shows the AccuJet Paper Advance parameters. The parameters
appear on the control panel screen in the order they are listed in the table.
Follow the instructions starting on page 4-12 to adjust the values for these
parameters.
NOTE:NOTE: These parameters influence the internal controls the plotter uses for paper
movement, and should not be adjusted.
TABLE 4-3 ACCUJET PAPER ADVANCE PARAMETERS
parameter function default
Flat PWM Command Used for development or field service. 100 percent
Rev Flat PWM
Command
Used for development or field service. 100 percent
Rev Ramp Up Period Used for development or field service. 15 units
Rev Ramp Down Period Used for development or field service. 15 units
Page Advance Delay Used for development or field service.
07000 msec intervals
1
01000 msec intervals
2
1 - AJ520
2 - APxxx

Gerber Technology AccuPlot AP-100 Specifications

General

Brand	Gerber Technology
Model	AccuPlot AP-100
Category	Plotter
Language	English