Index I-3
load. See Load
maximum width, 1-1
supply roll, 3-5, 5-4
switching to second roll, 5-12
take-up roll, 5-7, 5-11
transport system, 3-5
width adapters, 5-13
width, maximum 1-1
window length, 4-4
Parameters, 4-11
annotate with inkjet, 4-17
annotation acceleration, 4-15
annotation velocity, 4-15
change, 4-12
character set, 4-17
default, 4-14 - 4-18
flat PWM command, 4-16
font type, 4-17
IJ C axis home state, 4-18
inkjet acceleration, 4-18
inkjet strike count, 4-18
inkjet velocity, 4-18
inkjet, 4-18
language, 4-17
load default, 4-20
miscellaneous, 4-17
offset parameter values, 4-18
offset test DIM A, 4-18
offset test DIM B, 4-18
offset test DIM C, 4-18
offset test DIM D, 4-18
overview, 4-11
page advance delay, 4-16
paper advance, 4-16
pen down delay, 4-15
pen up acceleration, 4-17
pen up delay, 4-15
pen up velocity, 4-17
plot acceleration, 4-15
plot velocity, 4-15
plot, 4-15
rev flat PWM command, 4-16
rev ramp down period, 4-16
rev ramp up period, 4-16
save, 4-19
table, 4-14
view current settings, 4-13
X jet 1 offset, 4-18
X origin position, 4-14
X pivot offset, 4-18
X step size, 4-14
X table size, 4-14
Y jet 1 offset, 4-18
Y origin position, 4-14
Y pivot offset, 4-18
Y step size, 4-14
Y table size, 4-14
Part Numbers, 5-1
Pen
diagnostic plots, 4-31
lower, 4-7
maintenance, 5-14
new. See Maintenance
parameters. See Parameters
raise, 4-7
replacing. See Maintenance
timer, 4-21
Plot
parameters. See Parameters
Plotter
description, 1-1, 3-1
diagnostics, 4-26
initializing, 2-2, 4-3
maintenance. See Maintenance
menu structure, 4-2
parameters. See Parameters
part numbers, 5-1
physical characteristics, 3-1
plot tests, 4-30
power down, 2-4
power off, 2-4
power on, 2-1
power up, 2-1
reset, 4-10
starting, 2-1
stopping, 2-4
supplies, 5-1
tests, diagnostic 4-30
turn off, 2-4
turn on, 2-1
Power
Off. See Plotter
On. See Plotter
Servo, 4-8-4-9
Product Support, iv
To Next Page
Loading...
Need help?
General
