29
C. Gerhardt GmbH & Co. KG
Enter the number of blank samples to be deter-
mined with the selected program. The maximum
number of blank samples cannot exceed the num-
ber of samples for this program.
Range 0 - 20
If the amount of blank values > 0 is entered, their
position must be specified. The selection of the
position is done with the cursor key (left/right). It
can only be made for aposition, which is within
the range of determinations for the selected pro-
gram. When the position is reached it is identi-
fied with the cursor "up" or "down". The iden-
tity is shown by the letter "B" under the position
selected. This type of entry can only be left if the
number of blank values is identical with the num-
ber of markings.
If the blank samples are run for test purposes
only and have no influence on the calculation,
then select "Display Blank Value". If the blank
samples are needed for the calculation, confirm
by "Store Blank Value".
6.
7.
8.
Enter
Enter
Enter
Enter
SAMPLE INPUT
To Next Page
Loading...
