Standard Printing
5
1
Standard Printing
-
--
-
Printing
In this manual, the word, “Printing”
is used as opposed to “Copying” in
order to distinguish between the pro-
cess that your machine uses to make
prints, and the process used by a stan-
dard copier machine.
A standard copier scans in the origi-
nal for each copy set made. This ma-
chine, however, scans in your original
once and makes multiple prints from
this master.
This chapter describes the basic
pointing operations that your ma-
chine is capable of.
A
Lift the platen cover.
B
Set the original face down on the
exposure glass. The original
should be centered according to
the size marks on the right scale.
C
Lower the platen cover.
D
Press the
{
{{
{
Start
}
}}
}
key.
A trial print is delivered to the pa-
per delivery tray.
TSLH010E
TSLS012N
SilverV-EN.book Page 5 Monday, May 15, 2000 3:23 PM
To Next Page
Loading...
