Optional Functions
54
2
Printing in Two colors
After printing in one color, you can
print in another color on the same
side of the print.
Important
❒ Leave the prints for a while before
printing on them again to let the
ink dry.
❒ If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colors at
one time.
A
Prepare the two originals. Set the
first original on the exposure
glass.
B
Press the {
{{
{
Start
}
}}
} key.
C
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
Image
Position
} keys (see ⇒ P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see ⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
D
Enter the number of prints with
the number keys.
E
Press the {
{{
{
Print
}
}}
} key.
GRPREP0E
TSLS012N
TSLS011N
SilverV-EN.book Page 54 Monday, May 15, 2000 3:23 PM
To Next Page
Loading...
