Where To Put Your Machine
109
6
Where To Put Your Machine
Your machine's location should be carefully chosen because environmental con-
ditions greatly affect its performance.
Environmental Conditions
Optimum environmental conditions
CAUTION:
CAUTION:
• Temperature: 10 – 30°C, 50 – 86°F
•Humidity:
• Main Frame: 20 – 90 % RH
• Document feeder (option): 20 – 70 % RH
• A strong and level base (a sturdy desk and cabinet etc.).
• The machine must be level within 5 mm, 0.2" both front to rear and left to
right.
• Make sure to locate this machine in a large well ventilated room that has an
air turnover of more than 30 m
3
/hr/person.
Environments to avoid
• Locations exposed to direct sunlight or strong light (more than 1500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air
from a heater. (Sudden temperature changes might cause condensation with-
in the machine.)
• Places where the machine might be subjected to frequent strong vibration.
•Dusty areas.
• Areas with corrosive gases.
•
Keep the machine away from humidity and dust. A fire or an elec-
tric shock might occur.
•
Do not place the machine on an unstable or tilted surface. If it top-
ples over, it could cause injury.
•
If you use the machine in a confined space, make sure there is a
continuous air turnover.
To Next Page
Loading...
