3
Installing the Micro-SIM Card (Optional) and
Battery Pack
1. Sel ec t m odel s onl y:
With the micro-SIM card’s chip side facing up and the beveled corner pointing
to the slot, insert the card all the way into the slot.
NOTE: To remove the micro-SIM card, just push in the card to
pop-out and remove the card.
2. With the battery pack correctly oriented, attach its connector side to the battery
compartment at an angle (
) and then press down the other side (
). The
battery latch should be engaged in the locked position ( ).
To Next Page
Loading...
Need help?
General
