23
If you want to quickly turn off all wireless radio, simply switch on Airplane mode.
Connecti ng to a WLAN Network
1. Make sure that the WLAN function is enabled (as described above).
2.
For Windows 10: Tap the network icon in the system tray.
For Windows 7: Tap the Wireless Network icon on the taskbar. (An orange
light in the icon indicates connections are available.)
3. In the list of available wireless networks, tap a network, and then tap
Connect.
4. Some networks require a network security key or passphrase. To connect to
one of those networks, ask your network administrator or Internet service provider
(ISP) for the security key or passphrase.
For more information on setting a wireless network connection, refer to Windows
online help.
NOTE: You can use Intel® PROSet Wireless to take full advantage
of the Wi-Fi capabilities. See the Help of the utility for
instructions.
Using the BT Feature
The BT technology allows short-range wireless communications between devices
without requiring a cable connection. Data can be transmitted through walls, pockets
and briefcases as long as two devices are within range.
Turni ng On/ Off the BT Radi o
To turn on the BT radi o:
1. Make sure that the Airplane mode is switched off. You can control the Airplane
mode using one of the below methods.
Use the Air plane Mode button in the OSD Control Panel.
For Windows 10: Tap Setti ngs Network & Internet Airpl ane
mode. Slide the Air plane mode switch to the Off position.
To Next Page
Loading...
Need help?
General
