Getac RX10 User Manual

57
G-Manager
G-Manager is a unified user interface utility that allows you to view, manage, or
configure your computer features.
With G-Manager, you can perform all or some of the tasks listed below.
 View system information.
 Check the battery status and configure the battery.
 Configure ECO modes (or called power profiles).
 Set the touchscreen sensitivity mode.
 Set if a warning message will appear when a connected docking station is
removed unexpectedly.
 Enable the use of external GPS/WWAN/WLAN antenna signal.
 Change the function of the hardware button.
 Configure how your system works with the vehicle ignition.
 Monitor the system.
 View GPS information.
Tap and hold the Getac Utility icon located on Windows taskbar and select
G-Manager to start the program. The G-Manager window appears, containing several
tabs.
NOTE: Depending on your model, the actual items and information
appearing on the screen may differ from those shown in this
manual.

Getac RX10 Specifications

General

Brand	Getac
Model	RX10
Category	Tablet
Language	English