76
System Recovery
System Recovery (a Tool for Windows 7 Models)
Use System Recovery when:
The Windows 7 operating system does not start at all.
You want to restore the system to the factory state.
WARNING:
Using this feature will reinstall Windows to your system and
configure it to the system’s factory default settings. All
data on the hard disk drive will be lost.
Make sure that power is not interrupted during the recovery
process. An unsuccessful recovery may result in Windows
startup problems.
To run System Recovery:
1. Connect the AC adapter.
2. Turn on the Tablet PC. During system startup when the logo screen appears,
tap the screen or press the Windows Logo button on your Tablet PC. In the
pre-boot menu that appears, select Recovery.
Or, if a keyboard is connected, you can press
Ctr l + Al t + F2 keys for four seconds
instead of tapping the screen.
3. In the screen that appears, select
Rec overy to start the recovery process.