69
Make sure that both devices are compatible.
Displ ay Probl ems
Nothing appears on the sc reen.
During operation, the screen may automatically turn off as a result of power
management. Press any key to see if the screen comes back.
The brightness level might be too low. Increase the brightness.
The characters on the sc reen are dim.
Adjust the brightness and/or contrast.
The display brightness cannot be increased.
As a protection, the display brightness will be fixed at a low level when the
surrounding temperature is too high or too low. It is not a malfunction in this
situation.
Bad dots appear on the display at al l times.
A small number of missing, discolored, or bright dots on the screen are an
intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect.
Cl oudi ng (or cal l ed “mura”) happens on the screen when you exert forc es on
the left or ri ght side of the LCD frame.
This is a normal phenomenon, not a defect.
Hardware Devi ce Problems
The Tabl et PC does not recogni ze a newly instal l ed device.
The device may not be correctly configured in the BIOS Setup program. Run
the BIOS Setup program to identify the new type.
Make sure if any device driver needs to be installed. (Refer to the documentation
that came with the device.)
To Next Page
Loading...
Need help?
General
