70
Make sure if the device needs any jumper or switch settings. (Refer to the
documentation that came with the device.)
Check the cables or power cords for correct connections.
For an external device that has its own power switch, make sure that the power
is turned on.
Power Management Problems
The Tabl et PC does not enter Sleep or Hibernati on mode automati cal l y.
If you have a connection to another computer, the Tablet PC does not enter
Sleep or Hibernation mode if the connection is actively in use.
Make sure that the Sleep or Hibernation time-out is enabled.
The Tabl et PC does not enter Sleep or Hi bernati on mode i mmedi ately.
If the Tablet PC is performing an operation, it normally waits for the operation
to finish.
The Tabl et PC does not resume from Sl eep or Hibernation mode.
The Tablet PC automatically enters Sleep or Hibernation mode when the battery
pack is empty. Do any one of the following:
Connect the AC adapter to the Tablet PC.
Replace the empty battery pack with a fully charged one.
Sensor Problems (for Windows 10 Models Only)
The bui l t-in digital compass doesn’t seem to be accurate.
Rotating the display can affect the accuracy of the digital compass. This is normal,
not a malfunction. The sensors for the compass require periodic recalibration.
Follow this method to recalibrate the sensors:
1. Make sure you are far away from any large metal objects or magnetic fields.
2. Start an application that utilizes the digital compass.
3. Hold the Tablet PC level with the horizon, with the LCD side facing up.
To Next Page
Loading...
Need help?
General
