ULTIMA series ULTIMA series WASHERS
NU_ULTIMA_02_EN_1612 18
6.4 CHANGE OF THE TANKS
Before launching the cycle, check product tank levels and change those with low levels so as to avoid bad washing
because of a lack of additive.
6.5 HOW TO CHANGE CHEMICAL CONTAINER
Switch the washer OFF.
Use the necessary protection for the chemical to be changed (gloves, mask, safety glasses…) .
Locate the container(s) that need to be changed.
Unscrew the cap(s) from the empty chemical bottle(s) and take out the chemical suction tube(s).
Unscrew the cap(s) from the full chemical bottle(s) and insert the chemical suction tube(s). Tighten the cap(s) to secure the
chemical suction tube in place.
Switch the washer ON.
Dispose of used chemical bottles or caps according to local and company regulations. Please consult the Material Safety
Data Sheet for specific information regarding the chemicals used in the washer.
To Next Page
Loading...
Need help?
General
