ULTIMA series TRACEABILITY
NU_ULTIMA_02_EN_1612 46
3. THE PRO KIT (OPTION)
(OPTION ONLY FOR 810-815-820-910-1300-1400 LX MODELS)
The PRO KIT tracks a number of parameters and prints out their status OK/NOK or values at the end of the cycle for the
customer’s records and attention.
It is an easy and efficient method of quick analysis of the report.
PRO KIT 1 LX includes:
Printer, printout gives documented evidence of the cleaning process.
Water temperature, the water temperature is measured, both the preset and measured values are printed out.
Recirculation pump pressure, a pressure sensor will measure and print out the value. If the value is higher than the set
value an alarm will be raised and the machine will stop the process.
Detergent / Acid flow rate, both lines are individually fitted with a flow meter. The device will print out the flow of each line.
PRO KIT 2 LX includes:
All PRO KIT 1 features and checks the quality of the wash process by measuring the conductivity of the final rinse water.
The obtained value is printed out. If the value is higher than the set value an alarm will be raised and the machine will stop
the process.
EXAMPLES OF TICKET
To Next Page
Loading...
Need help?
General
