Getinge 1600 LXP User Manual

ULTIMA series MAINTENANCE OF THE WASHER
NU_ULTIMA_02_EN_1612 61
8. PREVENTATIVE MAINTENANCE SCHEDULE
FUNCTION
Daily (1) Biannual (2) 1 Year (2) 2 Years (2) 5 Years (2)
Clean filter system in chamber.
X
X
X
X
X
Check chemical containers for any leakage.
X
X
X
X
X
Ensure chemical hoses are not pinched.
X
X
X
X
X
Clean exterior panels.
X
X
X
X
X
Inspect water supply hoses for cracks, bulges, and leaks.
X
X
X
X
Ensure the water hose seals and filters are clean and have no cracks.
X
X
X
X
Check chemical supply hoses for cracks, bulges and leaks.
X
X
X
X
Inspect internal tubing on chemical pumps for wear.
X
X
X
X
Check chemical level sensors for correct operation.
X
X
X
X
Ensure all panels are properly secured.
X
X
X
X
Check all internal hoses for cracks, bulges and leaks.
X
X
X
X
Ensure all hose clamps are properly tightened.
X
X
X
X
Check all column seals for leaks and cracks.
X
X
X
X
Check spray arm support seals for leaks and cracks.
X
X
X
X
Check spray arms and bushings for wear.
X
X
X
X
Check door seal and gasket for leakage.
X
X
X
X
Inspect the door springs, door wheels, door cable, hooks, gas spring, mounting hardware,
and door switch for proper operation.
X X X X
Change the Hepa filter of the dryer (if applicable)
X
X
X
X
Check recycling and emptying pump seals for leakage and quiet operation.
X
X
X
Check for lose electrical connections at components and electronic cards.
X
X
X
Verify the correct operation of all relays and their associated components.
X
X
X
Verify the correct operation of the fan of the dryer (if applicable)
X
X
X
Verify the correct operation of the non-return valve of the drying network
(if applicable)
X X X
(1) Daily maintenance must be handled by users staff.
(2) Others maintenances (bi-annual, 1 year, 2 years & 5 years) must be carry out by the GETINGE LANCER’s technical
assistance service.

Getinge 1600 LXP Specifications

General

Brand	Getinge
Model	1600 LXP
Category	Washer
Language	English