Getinge 1600 LXP User Manual

ULTIMA series WASHING PROGRAMS
NU_ULTIMA_02_EN_1612 77
2. USER CYCLE PROGRAMMING TABLE
810 LX
815 LX
820 LX 910 LX 1300 LX
1400 LX
1400LXP
1600LXP 1800 LXA
Estimated consumption of
water per operation
(depending on the used
baskets
12 liters 12 liters 13 liters 15 liters 20 liters 30 liters 40 liters
IT IS NOT RECOMMEND TO SET WASH PROGRAMS AT MAXIMUM VALUES
FOR TIME AND TEMPERATURE AS THIS WILL RESULT IN REDUCED
EQUIPMENT LIFE AND INCREASED MAINTENANCE FREQUENCY OF
EQUIPMENT.
DO NOT SET BACK TO BACK HIGH TEMPERATURE 85°C TO 95°C HEATING
PHASES. DOING SO CAN INCREASE THE TEMPERATURE INSIDE THE
MACHINE AND MAY ACTIVATE SOME OVERHEATING DEVICES. TO PREVENT
THIS FROM OCCURRING, WE RECOMMEND TO PROGRAM A MINIMUM 30
SECOND COLD PHASE BETWEEN TWO HEATING PHASES.
IF YOU WISH TO CREATE A CUSTOM WASH PROGRAM, PLEASE REFER TO
THE FACTORY DEFAULT PROGRAMS FOR EXAMPLES OF TYPICAL TIMES
AND TEMPERATURES.
YOU MAY ALSO CONTACT YOUR GETINGE LANCER REPRESENTATIVE FOR
ADVICE ON CREATING WASH PROGRAMS.
IT IS NOT RECOMMENDED TO INSTALL THE MACHINE IN A PLACE
EXCEEDING 30°C. IT WILL HELP TO INCREASE DURING THE CYCLE THE
TEMPERATURE INSIDE THE MACHINE. IT WILL RESULT IN REDUCED
EQUIPMENT LIFE AND INCREASED MAINTENANCE FREQUENCY OF
EQUIPMENT

Getinge 1600 LXP Specifications

General

Brand	Getinge
Model	1600 LXP
Category	Washer
Language	English