ULTIMA series ACCESS TO THE USER’S MENU
NU_ULTIMA_02_EN_1612 33
CHAPTER 5
ACCESS TO THE USER’S MENU
1. SAMPLING
A sampling valve can be fitted on the sump of the washer to
perform sampling of the washer water. A sampling selection in the
program stops the washer. Sampling allows to control the
efficiency of the cycle and validate it.
Once a program as been selected, the program function menu
opens in which functions related to wash programs can be
selected
When the
icon is pressed, the sampling menu opens
The operator can select to be taken during the cycle :
:
one sample before the final rinse draining
phase (“final rinse” sampling).
:
multiple samples before each draining phase
(“multi-phase” sampling)
After making the appropriate selection, the display returns to the
program function menu.
After the program is started, a sample confirmation message will
appear during the cycle when it is time to take the sample.
Remove the sampling valve plug
Place a glassware under the sampling valve neck
Open the valve to take a sample.
Close the valve.
Put the plug back in place.
Once the sample has been taken, press on icon to allow
the cycle to continue.
To Next Page
Loading...
Need help?
General
