ULTIMA series ULTIMA series WASHERS
NU_ULTIMA_02_EN_1612 23
DETAIL ON BASKET INJECTOR :
An adaptable stainless steel wire to maintain the glassware in position
It shall be used with narrow width mouth glassware and shall not under any
circumstances exceed their flexibility by forcing glassware that is not intended to
be placed in these.
Just below the injector tip is a flat surface which allows a wrench to be used to
remove the injector for maintenance
An integrated spring clip allows the star base to be moved up or down to
accommodate different heights of glassware
You should only use baskets that are suitable for the parts to be washed. When your washer is put into
service, our technicians will give you useful advice on the best way to load the racks relative to the items to be
washed.
Please feel free to contact GETINGE LANCER for advice or assistance.
When several racks are used simultaneously on the different levels, only one rack should be pulled out of
chamber on the door and the runners at a time.
IF THE LOADED RACKS EXCEED 25 KG (55 LB) AN OPTIONAL TROLLEY CAN
BE USED TO LOAD AND UNLOAD THE WASHER.
To Next Page
Loading...
Need help?
General
