Getinge Volista - Replacing the Batteries

4
Maintenance procedures
Periodic maintenance
22 / 56
Maquet Volista
NM 01780 EN 03
Items Frequency
Adapter mounting screws
(tighten the screws to the recommended tightening torque)
Every 6 years
Acrobat 2000 or Ondaspace spring-arm snap ring Every 6 years
Batteries Every 3 years
For SAX and SATX suspensions
Items Frequency
All brakes Every year
Suspension mounting screws
(tighten the screws to the recommended tightening torque)
Every 10 years
Adapter mounting screws
(tighten the screws to the recommended tightening torque)
Every 10 years
Valia spring-arm snap ring Every 10 years
Oasys spring-arm snap ring Every 10 years
Batteries Every 3 years
4.2.2 Replacing the batteries
WARNING!
Risk of burns
If unsuitable batteries are used, they may explode due to the emission of
gases or liquids.
Always use batteries supplied by Getinge during installation and when repla-
cing defective batteries.
WARNING!
Risk of electric shock or injury
The use of screws or spare parts other than those supplied by the manufac-
turer may damage the device.
Use only screws and spare parts supplied by the manufacturer.
WARNING!
Risk of burns
A metal object falling onto the two poles of the battery simultaneously risks
short-circuiting the battery.
Handle the batteries with care to avoid causing a short circuit.
WARNING!
Risk of burns
Improper storage of batteries after removal may trigger a fire.
The terminals of used batteries must be insulated.