Getinge Volista - Use; Daily inspections

Adjustments
Adjusting the brakes
5
Maquet Volista
NM 01780 EN 03
37 / 56
5.5 Adjusting the brakes
NOTICE
It is normal for a newly installed brake to require readjustment after two to
six months of use in order to compensate for wear.
1
2
3
Fig.38: Brake wear
• Break-in zone 1
• Useful zone 2
• Wear zone 3
Suspension
Fig.39: Suspension brake adjustments
• Tighten screw to increase braking.
• Loosen screw to reduce braking.
VCSII lighthead
DF version
Fig.40: Adjusting the DF lighthead brake
• Adjust the lighthead brake, located on the
intermediate fork:
– Tighten screw to increase braking.
– Loosen screw to reduce braking.