Getinge Volista - Page 49

Document name: SW Service Protocol PM OR Lights VOLISTA_F
1
www.getinge.com
SW service protocol
Preventive maintenance
Surgical Lighting
VOLISTA
1. Customer
Address
Contact name
Telephone number
Order number
Installation date
Location (department, room number, etc.)
2. Product
Configuration
Part No.
Configuration
Serial No.
Description
Lighthead 1 Part
No.
Lighthead 1
Serial No.
Description
Lighthead 2 Part
No.
Lighthead 2
Serial No.
Description
The work time for all the service operations described in this documentation is estimated be 1 hour per
lighthead/equipment.
3. Periodic replacements
To ensure safety and performance, please follow the recommendations below.
SB, TUB, TUB SAT, SA arm, SAT arm and A2000 & ONDASPACE spring arm ranges.
Items
Frequency
Replaced
Not
replaced
N/A
All brake screws
Every year
Suspension mounting screws
(Tighten the screws to the recommended tightening torque)
Every 6 years
Adapter mounting screws
(Tighten the screws to the recommended tightening torque)
Every 6 years
Spring-arm snap rings
Every 6 years