95
The parameters of QoS Configuration are described as follows:
Field Description
WMM Enable or disable WMM.
WMM Power Saving Enable or disable WMM power saving mode.
PS Mode Power saving modes include AC_BE, AC_BK,
AC_VI, and AC_VO.
Direct Link Setup Enable or disable direct link setup.
Direct Link Setup (DLS)
After enabling direct link setup, you are allowed to set the MAC address and timeout
value.
The parameters of Direct Link Setup are described as follows:
Field Description
MAC Address Enter the MAC address of the DLS client.
Timeout Value Enter the timeout value for stopping DLS.
DLS Status
To Next Page
Loading...
